Description; Intended Use - Honeywell HON 5020 Assembly

2

Description

Contents
2.1

Intended use

Intended use
Limitations of use
HON 5020 gas pressure regulator
Topic
Intended use
Labels/Markings
Identifying the actuator assembly
Layout and operation
Technical specifications
The HON 5020 actuator assembly must be used exclusively with a compatible pilot made by
Honeywell. It is intended to be used, in combination with an appropriate pilot, as a gas pres-
sure regulator in a regulating line. Depending on the pilot model used in combination with
the actuator assembly, the latter can be used to maintain the outlet or inlet pressure of a gas
constant within the regulating line, regardless of the influence of disturbance variables such
as pressure changes and/or discharge changes. In addition, when combined with an appro-
priate pilot, the actuator assembly can be used to implement an active-monitor regulator
configuration. As a gas pressure regulator, it can also be used at transfer stations used in gas
transportation networks, as well as in power plants and industrial facilities. The HON 5020
actuator assembly unit can be used with natural gas or dry, non-aggressive industrial gases.
Note: The utilization limits of the device with regard to the medium, operating pressure and
operating temperature can be gathered from the type plate attached on the device or the
technical specifications.
The use under different operating conditions must be coordinated in consultation with the
manufacturer.
Please observe the following limitations of use:
 Do not use the device for any media other than those mentioned in the intended use or
those discussed with and approved by the manufacturer.
 Do not use the device in any installation position other than the one documented in
this component documentation.
 Do not use the device against the direction of flow specified on the device and in the
component documentation.
 When replacing defective parts, only use original spare parts or manufacturer-approved
standard parts.
 Do not attempt to modify or remodel the device on your own.
Description
Page
6
7
8
9
11
6