Transport And Installation; Transporting The Actuator Assembly - Honeywell HON 5020 Assembly

4

Transport and installation

Contents
4.1

Transporting the actuator assembly

Heavy transport units
Suspended loads
Selecting the hoisting
equipment and slings
HON 5020 gas pressure regulator
Topic
Transporting the actuator assembly
Mounting the actuator assembly
Checking the system for leaks
Risk of serious injury posed by heavy loads when using cranes for transportation
Transporting heavy devices or components with a crane may result in serious impact and
crush injuries if the loads start moving in an uncontrolled manner.
 Loads may only be transported with a crane by a duly qualified person.
 Markings and information about the center of gravity of the load (if applicable) must be
observed.
 Loads may only be moved under supervision.
Risk of serious injury in the event that load handling attachments break while holding a
suspended load
Heavy loads picked up or transported with hoisting and slinging gear may result in serious
impact and crush injuries if the load handling attachments fail.
 Only fasten the device at the positions intended for the transport.
 The load-bearing capacity of the appropriate hoisting equipment must correspond at
least to the weight of the load to be transported.
 Always stand clear of suspended loads.
 Ensure that no person is within the danger zone.
A mobile workshop crane is suitable for use as hoisting equipment.
The following are adequate for use as slings:
 Ropes
 Belts
 Chains
The hoisting equipment and slings must meet the following criteria:
 The load-bearing capacity is adequate for the weight of the HON 5020.
 The hoisting height is adequate for the mounting position at the installation site.
Transport and installation
Page
19
21
22
19