Honeywell HON 5020 Assembly page 17

Requirements for the
personal protective gear
HON 5020 gas pressure regulator
Personnel Responsibilities
 Initial start-up
Tasked with the commis-
 Renewed start-up
sioning
Tasked with the installa- Set-up
tion
Mechanical maintenance Involving mechanical parts:
personnel
 Fault finding
 Maintenance
 Repairs
Inspector Safety check
Tasked with the disposal Disposal of the device
Any persons handling the device must be equipped with the following personal protective
gear:
Task
Start-up, operation (including partial),
cleaning, maintenance, search and remedy
of errors
Required qualification
 Professional training and experience
operating pressure equipment and
systems
 Knowledge of the relevant standards
and regulations
 Ability to identify and avoid dangers
autonomously
 Professional training and experience
operating pressure equipment and
systems
 Knowledge of the relevant standards
and regulations
 Ability to identify and avoid dangers
autonomously
 Professional training and experience
operating pressure equipment and
systems
 Knowledge of the relevant standards
and regulations
 Ability to identify and avoid dangers
autonomously
Qualified inspector with adequate
knowledge of gas pressure regulators
 Professional training and experience
with the disposal of pressure
equipment and systems
 Knowledge of the relevant standards
and regulations
 Ability to identify and avoid dangers
autonomously
Required personal protective gear
 Industrial protective helmet
 Protective clothing
 Safety harness
 Ear protection
 Safety boots with protection for electrostatic dis-
charge (ESD)
 Safety goggles
 Safety gloves
Safety
17