AEG CIS6742ECM User Manual page 13

6.3 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
/ /
indicator is on, there is a risk
of burns from residual heat.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware.
The glass ceramic is heated by the heat
of the cookware.
The indicators /
a cooking zone is hot. They show the
level of the residual heat for the cooking
zones you are currently using.
The indicator may also appear:
• for the neighbouring cooking zones
even if you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the
cooking zone has cooled down.
6.4 The heat setting
Turn the knob for the heating functions to
select a heating function. To deactivate it
turn the knob to the off position
6.5 Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after
you activate the hob,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you use incorrect cookware. The
symbol comes on and the cooking
As long as the
/ appear when
.
zone deactivates automatically after 2
minutes.
• you do not deactivate a cooking zone
or change the heat setting. After some
time comes on and the hob
deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9
6.6 Automatic Heat Up
If you activate this function you can get a
necessary heat setting faster. The
function sets the highest heat setting for
some time and then decreases to the
correct heat setting.
To activate the function a
cooking zone must be cold.
To activate the function for a cooking
zone: turn the knob for a cooking zone to
the position. shows on the display.
Immediately set the correct heat setting.
To deactivate the function: turn the
knob to the off position.
6.7 PowerBoost
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
To activate the function for a cooking
zone: touch .
To deactivate the function: change the
heat setting.
ENGLISH 13
The hob deacti‐
vates after
6 hours
5 hours
4 hours
1.5 hour
comes on.