Band Width; Rx Freq; Tx Freq; Talk Around - Alinco DJ-MD5X Operation Manual

Middle: 2.5W
High: 5W
5. Offset
Press the / key to adjust frequency offset.

6. Band Width

Only narrow band 12.5KHz for digital channel.

7. RX Freq

Input the desired RX frequency by keypad, Press
Be noted that if auto repeater is set with a offset frequency, when changing RX
frequency the TX frequency will be changed by offset. If auto repeater with offset
frequency is set Off. RX and TX frequency are set independence.

8. TX Freq

Input the desired TX frequency by keypad, Press

9. Talk Around

As normal a radio communicates to a target radio through a repeater (TX and RX
frequency are set as different values). This option allows 2 radios communicate to
each others but you don't want to change frequency settings when repeater is out of
range or when the repeater is down. It works in both digital and analog channel. When
talk around set the transmitting radio`s TX and RX frequency are interchanged. Turn
off Talk Around when you want to communicate through repeater as normal.
Note: In analog channel the RX CTCSS/DCS decode is TX CTCSS/DCS encode and
vice versa.

10. Name

Allow edit the channel name via input character by keypad. This function is only valid
in memory channel mode.

11. TX Allow

Always: Always allow to transmit.
Channel Free: Allow to transmit when the channel is free.
Different CC: Allow to transmit when radio receives a matching carrier signal but
different color code.
Same CC: Allow to transmit when radio receives a matching carrier signal and it has
same color code.
(MENU) key to save the change.
(MENU) key to save the change.
29