9.3 Scan List
In the PC software Public Scan list, it allows to save 250 scan lists, and to
program the required scan lists and write it into radio.
Switch the radio to channel mode, as the scan list is only valid in the channel mode.
Select a Scan list as current scan list, then you can also reset the priority channel 1 and
priority channel 2 in the scan list.
9.4 Settings
Radio Set
Press
( MENU) key to enter the main menu setting then select settings Radio
Set.
1. Beep
Beep On: The radio will beep when you press the keypad
Beep Off: No beep when you press the keypad
2. Back Light
LCD backlight intensity is adjustable in 5 steps
3. Light Time
Always: The backlight is always on.
5S-5Min adjustable.
Note: This function is valid when turn off the power save.
4. Ch. Name
When radio works in the memory channel mode. Normally there are 2 ways to shows
a channel on the screen, shows as channel name and show as frequency.
CH (Channel name): Select to display the channel name on screen.
FREG (Frequency): Select to display the frequency of channel on screen.
5. Key Lock
Manual: press and hold the
( MENU) key is locked. Press
keypad.
Auto: Radio will auto lock the keypad when standby for a while. Press
then press the
key to unlock the keypad.
key to active the key lock, when key lock is on the
( MENU) key, then press the
21
key to unlock the
( MENU) key,