6.1.8 Rohs; Emc And Environmental Type Tests - Siemens SIMATIC NET RUGGEDCOM RS940G Installation Manual

Certification
6.1.8 RoHS
A copy of the Declaration of Conformity is available via Siemens Industry Online
Support at https://support.industry.siemens.com/cs/ww/en/view/89855782.
6.1.8 RoHS
This device is declared by Siemens AG to meet the requirements of the following
RoHS (Restriction of Hazardous Substances) directives for the restricted use of certain
hazardous substances in electrical and electronic equipment:
•
A copy of the Material Declaration is available online at
support.industry.siemens.com/cs/ww/en/view/109738831.
6.2

EMC and Environmental Type Tests

The RUGGEDCOM RS940G has passed the following EMC and environmental tests.
IEC 61850-3 Type Tests
61000-4-2
61000-4-3
61000-4-4
61000-4-5
34
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic
Information Products
Test
IEC ESD
IEC Radiated RFI
IEC Burst (Fast Transient)
IEC Surge
Description
Enclosure
Contact
Enclosure Air
Enclosure
Ports
Signal Ports
DC Power
Ports
AC Power
Ports
Earth
ground Ports
Signal Ports
DC Power
Ports
AC Power
Ports
https://
Test Levels
± 8 kV
± 15 kV
20 V/m
± 4 kV @ 2.5 kHz
± 4 kV
± 4 kV
± 4 kV
± 4 kV line-to-earth,
± 2 kV line-to-line
± 2 kV line-to-earth,
± 1 kV line-to-line
± 4 kV line-to-earth,
± 2 kV line-to-line
RUGGEDCOM RS940G
Installation Manual, 01/2021, C79000-G8976-1036-07
Severity
Levels
4
4
x
x
4
4
4
4
3
4