Fiber Optic Ethernet Ports; Sfp Transceivers - Siemens SIMATIC NET RUGGEDCOM RS940G Installation Manual

For specifications on the available copper Ethernet ports, refer to
Port Specifications (Page
4.2

Fiber Optic Ethernet Ports

Fiber optic Ethernet ports are available with either LC (Lucent Connector) and SC
(Standard or Subscriber Connector) connectors. Make sure the Transmit (Tx) and
Receive (Rx) connections of each port are properly connected and matched to
establish a proper link.
1
1
2
Figure 4.4
For specifications on the available fiber optic Ethernet ports, refer to
Ethernet Port Specifications (Page
4.3

SFP Transceivers

The RUGGEDCOM RS940G features four Small Form-Factor Pluggable (SFP)
transceiver sockets, which are compatible with a wide array of SFP transceivers
available from Siemens.
LEDs
Each socket features an LED that indicates its link state.
Green (Solid)
Green (Blinking)
Off
RUGGEDCOM RS940G
Installation Manual, 01/2021, C79000-G8976-1036-07
26)".
2
Tx Connector
Rx Connector
LC Port
State
Pin
10/100Base-
TX
8
1
Tx Connector
1
Rx Connector
2
Figure 4.5
26)".
Link established
Activity
No link detected
Communication Ports
4.2 Fiber Optic Ethernet Ports
Name Description
1000Base-
TX
BI_DD-
Directional
"Copper Ethernet
SC Port
"Fiber Optic
Description
Bi-
2
23