Yamaha F300 Owner's Manual page 89

unit could be damaged.
Do not tilt the outboard motor up so
●
that the cooling water inlet on the lower
unit is above the surface of the water
when setting up for and cruising in
shallow water. Otherwise severe dam-
age from overheating can result.
EMU35234
Procedure for power trim and tilt models
1. Place the control lever in neutral.
2. Slightly tilt the outboard motor up to the
desired position using the power trim
and tilt switch. WARNING! Using the
power trim and tilt switch on the bot-
tom cowling while the boat is moving
or engine is on could increase the
risk of falling overboard and could
distract the operator, increasing the
risk of collision with another boat or
an obstacle.
[EWM01850]
N
ZMU06236
N
ZMU05829
Operation
UP
UP
UP
UP
ZMU06280
ZMU05837
ZMU05838
83