Table of Contents
Advertisement
Setting up and using USB tethering
Share the Internet connection with another device over a USB cable.
The mobile data connection is active
¤
Use a USB cable to connect the smartphone to another device
connection and ensure that Media device (MTP) or Camera (PTP) is set (
Enabling/disabling USB tethering:
¤
Settings
tethering function with the switch . . . You can now establish an Internet connection with the
other device
When USB tethering is enabled, the
USB tethering is disabled permanently if you unplug the USB cable.
USB tethering is not available on Mac computers.
System
Date and time
¤
Settings
Automatic setting
The date and time are set automatically using a time server:
¤
Activate Automatic date & time
or:
Disable it and set the date and time manually
Manual setting
¤
Set date
Select a date in the calendar
¤
Set time
Drag the hour display to the correct position
Use the outer ring for 12-hour display
Use the inner and outer rings for 24-hour display
¤
Tap the minutes display of the time displayed
OK
Setting the time zone
The time zone is set automatically by default. Selecting the time zone yourself:
¤
Disable the switch next to Automatic time zone
zone from the list
Network & internet
icon is displayed in the Notifications bar.
System
Date & time . . .
p. 64
Hotspot & tethering
OK
OK
Drag the pointer to the correct position
Tap Select time zone
System
Open message over USB
p. 32)
Enable/disable the USB
Select the time
75
Advertisement
Table of Contents
