Table of Contents
Advertisement
Viewing WLAN details
¤
Settings
WLAN . . . Information on the connection is displayed, such as signal strength, connection
status and transmission rate
Changing the network settings:
Connection configuration
Align the network settings to the requirements of the WLAN to be used to establish a
connection.
¤
Settings
the down arrow next to Advanced options . . .
Metered networks
If your network has a data limit, you can define the WLAN as metered. You then have better
control over data usage when downloading and using other apps.
¤
Under Metered, select option Mark as "metered"
Proxy
If a connection to a WLAN is established over a proxy:
Manually entering the proxy details:
Automatic proxy configuration:
Save
A Proxy Auto Config (PAC) file enables a web browser to automatically find the right
proxy server for a required URL.
DHCP
When there is no active DHCP server in the WLAN:
network configuration data
Advanced options
¤
Settings
Automatically enable WLAN when it is near networks that are stored. Location detection must
be enabled.
¤
Enable/disable Turn on Wi-Fi automatically using the switch
Display powerful public network.
¤
Enable/disable Open network notification using the switch
Digital certificates are used to identify the device for WLAN access. You can install additional
certificates if not all those required are available.
¤
Install certificates
Certificates
p. 57
Network & internet
Tap
Network & internet
Manual
Autom. proxy config.
Save
Network & internet
Select the source for the certificate
Wi-Fi
Tap the network name of a connected
Wi-Fi
Tap the network name
Save
Tap Proxy
Enter the data
Enter the URL of a PAC file
Tap DHCP
Static
Wi-Fi
Wi-Fi settings
Network connections
Tap
Tap
Save
Enter the
Select option . . .
67
Advertisement
Table of Contents
