Gigaset GS110 Manual page 66

Network connections
WLAN
Use the smartphone to establish a connection to a WLAN, and use the connection to send data
and to surf the Internet.
A connection is established automatically if the smartphone is within range of a registered
WLAN and the WLAN function is enabled.
Enabling/disabling the WLAN function
¤
From the Status bar, swipe down using two fingers . . . The quick settings are displayed
the WLAN icon
or
¤
Settings
When WLAN is enabled, the
strength on four levels.
To prolong the battery life, disable the WLAN function when you are not using it.
WLAN is disabled in Flight mode.
Establishing a connection to a WLAN
¤
Settings
Networks protected by a password have a lock icon
lock icon are public hot spots.
¤
Tap the required WLAN
is successful, Connected is displayed under the network name
WLANs registered for the smartphone are shown at the end of the list under Saved networks,
even if they are currently out of range and no connection is established.
Showing saved WLANs:
Adding more WLANs
WLANs which do not send their name (the SSID) or are not within range are not displayed in the
WLAN list. They can still be saved with name and password. The connection is established if the
WLAN is within range.
¤
Settings
network Enter the network name (SSID) and security details
is included in the Saved networks list
Removing a WLAN
If the requirement is for the device to not automatically connect to a saved WLAN, the WLAN can
be removed from the list of saved networks.
¤
Settings
network to be removed
66
Network & internet
icon is displayed in the Status bar. The icon shows the signal
Network & internet
Enter the network password
Saved networks
Network & internet
Network & internet
Forget
Wi-Fi Enable/disable WLAN with the switch
Wi-Fi . . . All WLANs within range are displayed.
next to the entry. Networks without a
Connect . . . If the connection
Wi-Fi Scroll down as required
Wi-Fi Saved networks
Tap
Add a
Save . . . The network
Tap the saved