Gigaset GS110 Manual page 10

Getting started
Inserting the battery
¤
Insert the battery into the device with the
connector contacts facing forwards
the battery downwards into the battery
compartment.
Removing the battery:
¤
To change the battery, place your fingernail into
the recess on the battery compartment and pull
the battery up.
Closing the cover
¤
Align the cover with the side tabs on the slots on the inside of the casing.
¤
Press the cover until it clicks into place.
Charging the battery
¤
Plug the USB Type C connector on the charger
cable provided into the USB Type C connector
on the smartphone
¤
Connect the power adapter to the USB
connector of the charger cable and connect it to
the power source.
The device is charged once the charge icon
the Status bar is filled completely.
So your phone does not discharge during set-up, keeping it connected to the power
is recommended until set-up is complete.
Switching on the device
¤
Keep the On/Off button pressed until the device vibrates.
When you are requested to unlock the SIM card,
¤
use the keypad to enter the PIN of the SIM card
When switching on the device for the first time, a wizard starts which guides you through the
initial configuration.
10
Insert
in