Gigaset GS110 Manual page 65

Wi-Fi calling (depending on the mobile provider)
Make calls over WLAN.
Automatically select network
The network is selected automatically by default.
Selecting a network manually:
networks.
Access point names
Your mobile network operator can use these settings to determine the correct IP address for
your device, and so establish a secure connection for your device.
Using two SIM cards
¤
Settings
slots 1 and 2 are displayed
Enabling and disabling a SIM card:
Showing information:
¤
Tap an entry . . . The name of the SIM card, the colour used for the card, the mobile network
operator and the phone number are displayed. You can change the name and display colour.
Specify the preferred SIM card for the following functions:
•
Mobile data
Only one SIM card can be used for mobile data transmission.
•
Calls
You can specify one SIM card for all outgoing calls, or be prompted for which SIM card to use
before every call.
•
SMS messages
One SIM card can be defined for sending SMS messages.
You might need to perform the assignment anew when you insert a new SIM card or
swap out an existing one.
Switch off function
Network & internet
Enable/disable the switch
Select a provider from the available
SIM cards . . . Detected SIM cards in
Network connections
65