Table of Contents
Advertisement
Copy this entry to another handset. (You must have at least two
Copy
handsets to use this feature.)
Delete Erase this entry.
Chain Dialing
If you often have to enter a series of digits or a code number during a
call, you can save that code number to a phonebook entry and use the
phonebook to send the code number.
Enter the code number (up to 20 digits) into the phonebook just like a
regular phonebook entry. Be sure to enter the code number into the
phonebook exactly as you would enter it during a call.
When you hear the prompt that tells you to enter the number, open
the phonebook and find the entry that contains your code number.
Press
SElECT/mENU
number exactly as you entered it in the phonebook.
Finding a Lost Handset
With the phone in standby, press
for one minute, or until you press
handset.
Using an Optional Headset
You can use a standard 2.5 mm telephone headset with your handsets. To
purchase headsets, visit our website; www.uniden.com.au for Australia or
www.uniden.co.nz for New Zealand.To install a headset,
remove the headset jack cover and insert the headset
plug into the jack.
Just make and receive calls as usual, and use your
headset to talk to the caller after the call connects.
When you connect a headset, the handset
automatically mutes the earpiece and speaker. To
re-activate the earpiece or speaker, just unplug the
headset.
to transmit the code. The phone transmits the code
FIND
FIND
on the base. All handsets will beep
again or press any key on the found
13
Hide quick links:
Advertisement
Table of Contents
