Table of Contents
Advertisement
4.
Hang the mounting slots of the indoor unit on the upper portion of the mounting plate. Ensure that the hooks
are properly seated on the plate.
5.
Push the unit towards to the wall, and hook the unit onto the lower fixing hook.
Indoor Unit
Connections
Ensure that there is no leakage from the drain pipe connection and that the drain pipe has a
continuous fall to the outside.
CAUTION
Ensure that all wall penetrations are sufficiently weatherproofed.
OUTDOOR UNIT
Electrical Connections
Must be installed, maintained and removed by authorised persons in accordance with AS/NZS
3000 and to all other relevant local regulations and municipal building codes including OH&S
WARNING
requirements.
Ensure electric wiring is installed properly. Improper installation may cause malfunction, fire, or
electric shock.
The unit must be earthed following local electrical codes.
1.
Remove the wiring cover.
2.
Secure the electrical cable(s) and power cable onto the control board with the cable clip.
3.
Connect the cables as shown on the drawing below.
Wiring
cover
L
4.
Re-install the wiring cover.
Rinnai
Wall mounting bracket
HONRJ80B ONLY
N
S
S
N
LO
11
INSTALLATION
All Other Outdoor Models
L
Split AC IM
Advertisement
Table of Contents
