Sony Vaio VGP-UHDM10 Operating Instructions Manual page 15

4
Touch the wireless key receiver with the other wireless key
after the blue light of the wireless key receiver starts to flash
again.
The blue light will go out after the wireless key is registered.
z
Tips
• The blue light of the wireless key receiver repeats this pattern: flashes twice and
goes out for one second. If you do not touch the wireless key receiver with the
wireless key for more than 5 seconds, the blue light of the wireless key receiver
goes out and the previous status returns. In this case, follow the procedure from
step 1 again to register the wireless key.
• If the blue light of the wireless key receiver keeps flashing even after touching
wireless key receiver with the wireless key, you may have touched it with the first
key by mistake. Try touching with the other key.
• If you use the Windows 2000 operating system, "Unsafe Removal of Device"
appears.
5
Disconnect the drive form the computer (page 12).
Registering is complete. The security function will be activated from
the next time you connect the USB cable to the computer.
Continued on next page
15