Caring For Your Cleaner; Troubleshooting - Panasonic MC-CJ915 Operating Instructions Manual

Hide thumbs

Table of Contents

Available languages

Please perform the following

before storing.

Turn oﬀ the power.

●

Rewind the power cord.

●

(Hold the plug to ensure the power

cord does not jump.)

Store the supplied nozzles.

●

Please replace the cloth dust bag in the following cases:

When the indicator turns red.(Turn the power control to the highest setting and lift the nozzle oﬀ the fl oor.)

●

Suction power has dropped.

●

If suction power does not return after removing dust...

Check for blockages in hose, telescopic wand, and nozzles. Clean the pre-motor filter.

Remove the cloth dust bag fi rst.

Remove the pre-motor fi lter

●

and tap to release dust.

Cleaning

Gently wash with water and

●

pre-motor

dry in shade if dust is not

fi lter

easily removed.

Return the pre-motor fi lter to

●

its original position.

Using an old toothbrush

●

or similar tool, clean any dust

or lint from the brush.

Cleaning

Do not wash with water.

●

nozzle

Replace the Exhaust fi lter.

●

After one year

has passed...

Attention

Do not use detergent or any other cleaning liquids.

●

Do not wash the pre-motor filter in a washing machine or dry it with a dryer or other source of hot air.

●

Attach the pre-motor filter correctly (to avoid damaging motor).

●

Please check the following first if you have any problems. If your problem is still not solved, consult your local retailer.

'It won't switch on!'

Check that the plug is connected firmly and the socket

outlet is working normally.

(If a thermal cut-out device has activated, please wait

approx. 60 minutes until it has reset)

If the product still does not work, please take it to an

authorized service centre for repair.

Storing

Storage position

Replacing the cloth dust bag

Slide the bag clip to open the

cloth dust bag, remove the dust,

then slide the bag clip back to its

original position.