To Assemble Cleaner - Panasonic QUICKDRAW MC-V7325 Operating Instructions Manual

TO ASSEMBLE CLEANER
TIN WARNING octies snoce naana
DO NOT plug Into electrical supply until assembly is complete. Failure to do so could
result in electrical shock or injury.
1. The handle screw has
been installed for shipping
purposes. Please remove
the screw before inserting the
handle. Insert the handle as
shown in the illustration.
2. Insert the screw
that you have
removed. Be sure the
screw is tightened,
but not overtight-
ened.
Make sure the ON/OFF
switch is in the OFF
position before
installing.
4. Loosely wrap the power cord
around the quick release cord
hook and the lower cord retain-
er. Secure the plug head to
the cord by pushing the
power cord into the retainer
on the plug head.
3. There are two (2) recessed areas
located on the handle, as shown in
the illustration, designed to secure
the power cord during vac-
uuming. ~ Power
Cord
Always push the power
cord down into these recessed
areas to help keep the power
cord from hariging near the Retainer i
nozzle and being damaged С (Plug Head) (A
by the agitator.
j
2. DO NOT unplug the
power cord by pulling on the
cord. Grasp the plug
head and pull to unplug the
vacuum cleaner.
Return the hook to the
upright position before
attempting to rewind the
cord.
1. The upper cord hook
has a quick-release action.
To release the power cord,
rotate the hook downward
and the complete power
cord will drop off the hook
for immediate use.
ШИ) E
Somm