Advertisement
Quick Stop Mode:
With vehicle running, if you wish to make a quick stop and leave the vehicle running, once you
arrive at your destination:
a) place the gear selector in Park,
b) set the parking brake,
c) with your foot off the brake, press the transmitter button two times in succession.
The vehicle will now be under control of the remote start system. Turn your ignition switch off,
WITHOUT, stepping on the brake, and exit the vehicle. Lock the doors with the key to insure
security.
In addition to the time, the LCD screen on your remote indicates many things which may be re-
lated to the activity of the Keyless Entry, Remote Start, & or Alarm installed in your vehicle. Also
you have the ability to set certain functions and features of the remote control itself, like vibrate
or tone, count down parking meter timer etc,,,Use the chart shown to identify these events. and
the following charts to set the features of your remote.
(1) Vibrate Mode On
(2) Transmit Icon
(3) Siren Chirps Active Or Inactive
(4) Lock or Unlock Indicator
(5) Page From Vehicle Indicator
(6)Light Flash Indicator
(7) Anti Hijack Indicator
Available On Some Models
(8) Remote Start Inhibit Indicator
(9) Clock Stop/Watch/Meter Counter
To program the remote for time settings, alarm clock, and count down timers, see chart that
follows
24 Hour Start Timer Active (21)
Battery Save Indicator (20)
Battery Charge Indicator (19)
PRESTIGE
Sensor Activated Indication (18)
S
Prime or Secondary Car Mode (17)
24
Valet Mode Indication (16)
A
Trunk Entry/Open Indication (15)
1 2
Door Entry/Open Indication (14)
Z
Z
Vehicle Running Indicator (13)
Temperture Start Mode Active (12)
Count Down Hour Glass (11)
IGN
INHIBIT
Count Down Timer Active(10)
AM
PM
Page 2
128-9456
Page 2
Advertisement
