Information marked with this symbol helps you to carry out your tasks quickly and safely. Follow the manual Information marked with this symbol indicates that the operating manual must be observed. infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200...
• Never insert any objects or limbs into the device. • Do not use the device as source of ignition. • Do not cover the device during operation. infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200...
Page 4
Do not install the heating device in immediate proximity to swimming pools! Warning In order to avoid overheating and fire hazards, the device must not be covered! infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200...
• 4 x Spring washer Ø 4.1 mm (16) • 4 x Hexagon nut M4 (17) • 4 x Phillips screw M4 (18) • 1 x Remote control (4) • 1 x Manual (not pictured) infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200...
Page 7
5. Tighten the two wing screws on the device to lock the device holders. 2. Connect the second device holder to the second mounting bracket. infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200...
Page 8
Always install the device with the help of other • Do not install the device directly behind a door. persons. • Only install the device in a horizontal position. infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200...
Page 9
4. Insert suitable wall plugs into the drill holes. 5. Screw the mounting brackets to the wall / ceiling. 45° 6. Check the mounting brackets for tight fit. infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200...
Page 10
Never guide the power cable along the front The device heats objects and persons inside a certain effective of the device! range. Height Depth Width Effective range infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200...
If you switch off the device via the remote control, the device will be set to standby mode. If standby operation is not required, you can switch the device off via the on/off switch (2). infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200...
• Check the on-site fusing. • Wait for 10 minutes before restarting the device. If the device is not starting, have the electrics checked by a specialist company or by Trotec. infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200...
• If the batteries have just been changed, check them for correct polarity. Note Wait for at least 10 minutes after maintenance and repair work. Only then switch the device back on. infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200...
20 cm 20 cm 20 cm 20 cm front: 100 cm 100 cm 100 cm 100 cm Weight 8 kg 9.5 kg 11.5 kg 13.5 kg infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200...
Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators. Please dispose of batteries and accumulators according to the relevant legal requirements. infrared radiant heater IRD 1200 / IRD 1800 / IRD 2400 / IRD 3200...