Adjusting The Shelf; Connection To The Mains Supply - FRIGOGLASS MAX-450 User Manual

Note: Relocation of the ICM inside the outlet
a. Empty the ICM and unplug from mains supply.
b. Do not fully extract the leveling feet.
c. Fully extract the leveling feet.
d. Move the unit to the desired location with the assistance of another person.

3.2 Adjusting the shelf

To adjust the shelf first unload it, lift it and unclip the shelf clips (4). Place the clips in the desired
position and reposition the shelf. Make sure that the horizontal metal rods at the bottom of the shelf
are between the front and back shelf clips.

3.3 Connection to the mains supply

Connect the ICM to a 220-240 Volts power supply on a 10A-16A fused & grounded socket. Do not use
extension cables.
Do not connect the merchandiser to:
•
a non grounded wall socket or power line
•
improper supply voltage and frequency
•
power supply that does not comply with the safety regulations of
the appliance or with current legislation on electrical installations
Rotate back spacer,
where applicable
ENG
12