Installation & Operation; Installation Instructions - FRIGOGLASS MAX-450 User Manual

3. Installation & operation
3.1

Installation instructions

i. After unpacking, check the cabinet for any damage caused during transportation. In the event of
damage, please contact the forwarding company.
ii. Always ensure that your merchandiser is installed on a stable surface/floor. There are
2 adjustable feet at the front, under the chassis. The cooler must be leveled through proper
MAX-450 [R290] C, MAX-700 [R290] C, MAX-900 HD [R290] C,
MAX-1000 HD/SD [R290] C are equipped with HC refrigerant, and
have been tested and proven to be safe according to related
standards. All necessary actions for safe usage & maintenance
of these appliances are described in this manual. Read carefully
before using the appliance and follow all precautions included in
this manual.
To reduce the possibility of fire, this appliance must be installed
only by a suitably qualified person.
Failure to comply with the instructions may result in high-energy
consumption, poor performance of the unit and void warranty.
Do not place the merchandiser:
•
in direct sunlight or near heat sources (radiators, stoves & other
heating equipment)
•
outdoors, without proper protection from rain, moisture and other
atmospheric elements
• in weather conditions for which it is not certified
•
in extreme environmental conditions (i.e. extensive exposure to
saline humidity)
• Keep clear of obstruction all ventilation openings in the appliance
enclosure or in the structure for building-in.
• Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the
manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type
recommended by the manufacturer.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
ENG
10