Table of Contents
Advertisement
AN186 - Rev. 1.0
DMD2050 FTP
6.8 Ethernet Rate
This section provides instructions to set the data rate for the local
Ethernet interface.
1.
At the <TCP/IP> Submenu, scroll to the 'ETHER RATE' Selection.
2.
Select '10 MBPS/HD' and press <ENTER>.
7.0 DMD2050 FTP Configuration
7.1 User ID
1.
At the <FTP> Submenu, scroll to the 'USER ID' Selection.
2.
Set the user ID to a maximum of 13 alphanumeric characters and press <ENTER>.
3.
To clear to the right of the cursor, press the <RIGHT ARROW> and <CLEAR> keys at
the same time.
7.2 Password
1.
At the <FTP> Submenu, scroll to the 'PASSWORD' Selection.
2.
Set the FTP password to a maximum of 13 alphanumeric characters and press
<ENTER>.
3.
To clear to the right of the cursor, press the <RIGHT ARROW> and <CLEAR> keys at
the same time.
8.0 Ethernet Test
8.1 Connecting the Ethernet Cable and Testing the Link
1.
Connect the computer to the DMD2050 port (J21) using the RJ-45 to RJ-45 10BaseT
Cables via a hub as shown in Figure 1.
Page 6
Advertisement
Table of Contents
