Table of Contents
Advertisement
AN186 - Rev. 1.0
DMD2050 FTP
9.0 FTP Transfer
Verify that the DMD2050 is reachable before proceeding (refer to Section
8.0).
1.
Make sure the compact flash is installed on the left side of the unit (left side when facing
the front panel).
2.
Configure the FTP utility "Host Name / IP Address" to the modem IP address selected in
Section 6.4
3.
Configure the FTP utility "User ID" to the modem FTP User ID selected in Section 7.1
4.
Configure the FTP utility "Password" to the modem FTP Password selected in Section
7.2
5.
Connect to the DMD2050 using FTP.
6.
The compact flash will appear in one of the window panes of the FTP utility as a regular
drive, /MC.
7.
Use the utility windows explorer to scroll through the compact flash drive. A directory
called \MC will be visible.
8.
Use the utility windows explorer to scroll through the PC directory to \dmd2050\rev-yy
folder created in Section 4.0.
9.
Copy the compact flash \MC\ACCEPTED folder with drag and drop or through the arrow
keys into the \dmd2050\rev-yy folder on your hard drive to back up the old firmware
revision.
10.
Copy the contents of \MC\ACCEPTED folder from the \dmd2050\rev-xx folder on your
hard drive to the \MC\PENDING folder of the compact flash.
11.
Cycle Power to modem
12.
Modem will display \MC\PENDING ENTER = YES, CLEAR = NO
13.
Press ENTER on the front panel
14.
Once modem finishes rebooting Reconnect to the DMD2050 using FTP.
15.
The compact flash will appear in one of the window panes of the FTP utility as a regular
drive, /MC.
Page 8
Advertisement
Table of Contents
