HID Technology Solutions 1062 User Manual page 30

APPLICATION EXAMPLES – PC APPLICATION EXAMPLES – POCKET PC
www.tsl.com
Tap 'Next' to see the following Connection Summary window:
Finally, tap 'Connect' to open the link with the Handscanner. For other devices, or if the Pairing Wizard application is
used these intermediate stages may not be required and the virtual comm. port will be opened immediately. Once
connected the button will change to show 'Disconnect' as above, and the blue LED on the Handscanner will light
continuously.
Any RFID or barcode data scanned by the Handscanner will then appear at the top of the window and also in the
'Default text window' whilst SmartWedge Basic is shown. Even when SmartWedge Basic is minimised the Most
recent scan data entry is always updated with the most recently received text. Minimise SmartWedge Basic using
the cross in the top right hand corner of the screen.
Open the application that is to receive the scan data, for example Pocket Excel and position the cursor at the data
entry point. Scan data will then be entered into the target application. By default all scanned data is terminated with
CR LF characters to automate data entry.
Note that if CAPS lock is selected on the terminal all of the alphabetical characters will have their case reversed
so a lower case character from a barcode will appear as an upper case character in the receiving application and
vice versa.
30
Copyright © 2021 Technology Solutions (UK) Ltd 1062 Handscanner User Guide V1.41