Application Examples - Pc; Introduction; Setting Up The Bluetooth ® Connection - HID Technology Solutions 1062 User Manual

APPLICATION EXAMPLES – PC

INTRODUCTION

These examples assume that the Handscanner is in its factory default state and that it is being used on a PC
running Windows XP. The same approach can be taken with any other platform.
SETTING UP THE BLUETOOTH
Establishing a Bluetooth
the Bluetooth Serial Port Profile and therefore a Virtual Comm port will be created as part of the Bluetooth
®
process.
Launch the Bluetooth
the Handscanner by pressing the yellow button. The Blue LED will start to flash slowly. Tick the 'My device is set up
and ready to be found.' box and click the 'Next' button. This starts the Discovery process. When this is complete a
list of devices will be shown, including the Handscanner as shown below:
The Handscanner will be identified by its Bluetooth
the side of the Handscanner. Click on the Handscanner and then on 'Next' to start Pairing. Enter the default PIN of
'0000' as shown below and then click 'Next'.
Copyright © 2021 Technology Solutions (UK) Ltd
connection requires the stages of Discovery and Pairing. The Handscanner conforms to
®
Device window (Start>Control Panel> Bluetooth
®
CONNECTION
®
Devices). Click the 'Add' button, switch on
®
Friendly name which by default is the serial number printed on
®
12
www.tsl.com
setup
®
1062 Handscanner User Guide V1.41