HID Technology Solutions 1062 User Manual page 15

APPLICATION EXAMPLES – PC
www.tsl.com
Any RFID or barcode data scanned by the Handscanner will then appear at the top of the window and also in
the 'Default text window' whilst SmartWedge Basic has focus (the cursor is flashing in the 'Default text window').
Launch the application that is to receive the data, for example Excel, and position the cursor at the data entry point.
Scan data will then be entered into the target application. By default all scanned data is terminated with CR LF
characters to automate data entry. A typical screenshot is shown below:
Note that if CAPS lock is selected on the PC keyboard all of the alphabetical characters will have their case
reversed so a lower case character from a barcode will appear as an upper case character in the receiving
application and vice versa.
Minimise SmartWedge Basic using the cross in the top right hand corner of the window. SmartWedge Basic
minimises to the System Tray. Hover the mouse over the icon to see the current status, double click to restore
the main window or right click to restore, disconnect or exit the application. Even when SmartWedge Basic is
minimised the 'Most recent scan data' entry is always updated with the most recently received text.
When SmartWedge Basic is no longer required, click 'Disconnect' to close the link to the Handscanner and exit
SmartWedge Basic from 'File > Exit'.
15
Copyright © 2021 Technology Solutions (UK) Ltd 1062 Handscanner User Guide V1.41