HID Technology Solutions 1062 User Manual page 17

APPLICATION EXAMPLES – PC
www.tsl.com
Check that the Handscanner is switched on, click 'OK' and the Bluetooth connection will be established. Any
®
barcodes or transponders read by the Handscanner will be displayed by HyperTerminal. Note that the virtual
comm. port is opened at the default setting of 2400 baud. This does not affect performance because only small
amounts of data are being transferred. It is possible to modify the baud rate and other connection settings by
closing the connection and using 'File>Properties'.
17
Copyright © 2021 Technology Solutions (UK) Ltd 1062 Handscanner User Guide V1.41