Table of Contents
Advertisement
USING THE HANDSCANNER
www.tsl.com
Batch mode is a useful feature in help to avoid data loss if the Bluetooth
link drops because the Handscanner
®
has moved out of range of the host. There is a risk of a short period of data loss because the Bluetooth
link failure
®
indication is not immediate. Scan data obtained during the period between moving out of range and the Bluetooth
®
link indicating failure may not be preserved.
SCAN TIME
The maximum duration in seconds of a scan can be configured. The barcode reader has an independent maximum
scan duration (4s for 1D, 10s for 2D). Setting the Scan Time to shorter than these times results in barcode and RFID
scanning stopping at the specified time, setting the Scan Time to longer times results in the barcode scanning
stopping before the RFID.
POWER DOWN TIME
The time in seconds that the Handscanner stays powered on after the Bluetooth
link has dropped or the button
®
has been pressed can be changed from the default value of 120 seconds.
FIRMWARE UPDATE
The Desktop Configuration application includes a firmware loader for updating the Handscanner firmware.
11
Copyright © 2021 Technology Solutions (UK) Ltd
1062 Handscanner User Guide V1.41
Advertisement
Table of Contents
