Subscribe to Our Youtube Channel
Related Manuals for Holzstar SAA Series
Summary of Contents for Holzstar SAA Series
- Page 1 Operating Instructions Chip Extraction Unit SAA 2001 SAA 2003 SAA 3001 SAA 3003 SAA 3001 SAA 2001...
-
Page 2: Table Of Contents
13 Wiring diagrams........18 use and notification of its content is not permitted without 14 EC - Declaration of Conformity.....19 explicit consent. Infringements will lead to claims for da- mages. Subject to technical changes and errors. SAA Series | Version 1.06... -
Page 3: Introduction
Please submit any information and experiences you tes a potentially hazardous situation which may cause minor or light injuries if it is not averted. make during application of the machine as these may be valuable for product improvements. SAA Series | Version 1.06... -
Page 4: Operator Responsibility
- During the entire machine operating time operators tor has made him/herself familiar with them. must check whether the operating instructions they created meet current standards and adapt the ope- rating instructions where necessary. SAA Series | Version 1.06... -
Page 5: Personal Protective Equipment
Protective gloves Protective gloves protect the hands from compo- nents with sharp objects as well as friction, abrasion, and deep-cut injuries. Protection of face The face protection prevent the face of objects flying around. SAA Series | Version 1.06... -
Page 6: General Safety Aspects
11. Wood dust is explosive and can be harmful to health. In particular, tropical woods and hardwoods such as beech and oak are classified as carcinogenic. 12. Work with reason and with concentration. Do not use the Extraction Unit if you are not concentrated. SAA Series | Version 1.06... -
Page 7: Safety Aspects In Dealing With Application Of Tools
7. Take care that the aspiration system cannot be started during servicing work and changement of dust bag. Breathing protection A dust protection mask (filter mask with particle filter) is to be worn during the changement and emptying of the dust bag. SAA Series | Version 1.06... -
Page 8: Intended Use
[L x W x H] 2.000 mm 2.000 mm Cover the machine with a protective tarpaulin. Weight 37 kg 48kg Electrical connection: SAA 2001/ SAA 3001 230 V/50 Hz SAA 2003 / SAA 3003 400 V/50 Hz SAA Series | Version 1.06... -
Page 9: Machine Description
Mains voltage and frequency correspond to the Filter (Inlet) values of the engine of the machine. - The installation location must have good illumina- 6.2 Scope of supply tion. 1. Filter bag 2. Chip bag 3. Operating instructions SAA Series | Version 1.06... -
Page 10: Set Up The Chip Extraction Unit
Step 5: Inspect regularly the chip bag and empty it if full is. Step 6: Before operating the on / off switch, make sure that the filter bag is good fixed. SAA Series | Version 1.06... -
Page 11: Installation Of The Chip Extraction Unit
Then attach the two filterbags and two collection bags to the collectors using bag clamp. Step 3: The inlet can now be placed on the intake hole of the fan/motor assembly (Fig. 10). Fig. 6: Installation of the fan/motor assembly (2) SAA Series | Version 1.06... -
Page 12: Maintenance And Service
Damaged safety devices, machine parts and coun- ters must be exchanged in accordance with the requi- rements by an approved professional workshop. SAA Series | Version 1.06... -
Page 13: Malfunctions, Their Potential Causes And Remedies
ATTENTION! Please take care for an environmentally sound dispo- sal of the used coolants and lubricants. Follow the disposal tips of your municipal disposal companies. SAA Series | Version 1.06... -
Page 14: Disposal By Municipal Collection Point
The manufacturer warranty shall be rendered void in Chip Extraction Unit SAA 2003 5922203 the event of a use of unauthorised spare parts. Chip Extraction Unit SAA 3001 5922301 Chip Extraction Unit SAA 3003 5922303 SAA Series | Version 1.06... -
Page 15: Spare Parts Drawings
The following drawings are intended to help identify the necessary spare parts. To order, please send a copy of the part drawing with the marked components to your dealer. Spare parts drawing SAA 2001/ SAA 2003 Fig. 11: Spare parts drawing SAA 2001/ SAA 2003 SAA Series | Version 1.06... - Page 16 Spare parts Spare parts drawing SAA 3001/ SAA 3003 Fig. 12: Spare parts drawing SAA 3001/ SAA 3003 SAA Series | Version 1.06...
-
Page 17: Spare Parts List Saa 2001/ Saa 2003
Collector 0-xxxxxxx-34 Cable 0-xxxxxxx-34 Hose Clamp 0-xxxxxxx-35 0-xxxxxxx-35 Filter Bag 0-xxxxxxx-36 Bag Clamp 0-xxxxxxx-36 Collector Bag 0-xxxxxxx-37 Switch Box 0-xxxxxxx-37 Collector Support 0-xxxxxxx-38 Head Screw 0-xxxxxxx-38 Screw 0-xxxxxxx-39 Screw 0-xxxxxxx-39 0-xxxxxxx-44 Wrench 0-xxxxxxx-40 Support Block SAA Series | Version 1.06... -
Page 18: Wiring Diagrams
Wiring diagrams 13 Wiring diagrams Wiring diagram SAA 2001/ 230 Wiring diagram SAA 2003 / 400 Wiring diagram SAA 3001 / 230 Wiring diagram SAA 3003 / 400 Fig. 13: Wiring diagrams SAA Series | Version 1.06... -
Page 19: Ec - Declaration Of Conformity
Risk assessment and risk reduction (ISO 12100:2010) DIN EN 60204-1:2014 Safety of machinery - Electrical equipment of machines - Part 1: General requirements Kilian Stürmer, Dr.-Robert-Pfleger-Str. 26, D-96103 Hallstadt Responsible for documentation: Hallstadt, 13.04.2016 ______________________ Kilian Stürmer CEO, Director SAA Series | Version 1.06... - Page 20 www.holzstar.de...
Need help?
Do you have a question about the SAA Series and is the answer not in the manual?
Questions and answers