Machine Description; Illustration; Scope Of Supply; Optional Accessories - Holzstar SAA Series Operating Instructions Manual

6

Machine description

6.1 Illustration

Figures in this operation manual serve to provide a
basic understanding and may differ from the actual
design.
P
A
I
B
G
R
J
Fig. 3: Chip Extraction Unit SAA 3001
Pos. Description
A Connector
B Fan/Motor
assembly
C Casing
D Base Plate
E Upper bag support
F Support rods
G Intake duct
R Filter (Inlet)

6.2 Scope of supply

1. Filter bag
2. Chip bag
3. Operating instructions
SAA Series | Version 1.06
C
O
H
F
D
Pos. Description
H Bag
I Packing
J Four casters
K Nuts, screws,
washers,
spring washers
L Motor base
O Bag clamp
P Filter

6.3 Optional accessories

Tips and recommendations
We recommend using only high-quality original Holz-
star accessories. Only with original accessories can
be guaranteed a perfect operation and optimal work
results.
Bezeichnung
PU extraction hose, 100 mm/2,5 m
Ø
Polyurethane flexible hose, available in 2,5 / 5 / 7,5 or 10
m Lengths, 40 mm, 60 mm,
Ø Ø
120 mm
Reducing socket, machine connecting pieces, straight,
non-crimped, interior Ø - 100-60 mm
Floor cleaning set, incl. 2,5 m spiral hose, extraction
pipe, floor nozzle with rollers, handle and 2 pipe clamps
Filterbag for SAA 2001, SAA 2003, SAA 3001 or
SAA 3003
Automatic starting system ALA 2 or ALA10 for SAA 2001,
SAA 2003, SAA 3001, SAA 3003
7

Installation and connection

7.1 Requirements to the installation location

Remove the chip extraction unit from its packaging and
remove all protective foils.
To achieve a good function and a long life of the Chip
Extraction Unit, the installation location should satisfy
the following criteria:
- The machine state and machine table must be
stable, level and free of vibrations ground.
- Don´t expose the machine to moisture, rain or
snow. Don't place or operate the machine in a hu-
mid or wet environment.
- The installation or worker area must be dry and
well ventilated.
- The ambient temperature must be within -10 °
to + 50 ° Celsius, max. air humidity 90%.
- It must be sufficient space for the operator, for ma-
terial transport and for adjustment and main-
tenance work.
- The Chip Extraction Unit must be well grounded.
Mains voltage and frequency correspond to the
values of the engine of the machine.
- The installation location must have good illumina-
tion.
Machine description
80 mm, 100 mm,
Ø Ø Ø
9