Options; Overview Of Option Modules - Nord Drivesystems NORDAC PRO SK 500P Manual With Installation Instructions

3 Options

3.1 Overview of option modules

The function of the frequency inverter can be extended with a
ControlBox SK TU5-CTR, a customer unit SK CU5-...
(SK 530P and higher) and other option modules. The options
can be plugged in. Either a blank cover or an SK TU5 module
can be attached to an SK CU5 module.
Detailed information about the options listed below can be found in the relevant documentation.
ControlBox
Module Designation
SK TU5-CTR ControlBox
Customer units
Module
SK CU5-MLT Encoder interface: TTL, SIN/COS,
Hiperface, Endat, Biss, SS1
Functional safety: STO, SS1
SK CU5-STO Functional safety: STO, SS1
Other option modules
Module Interface
SK EBGR-1 Electronic
rectifier
SK EBIOE-2 IO extension
1) Usable with SK 530P and higher
BU 0600 en-3221
Description
Commissioning,
parameterisation
and control of the
frequency inverter
Interface
brake Extension for direct control of an
electromechanical brake, IP20, snap-on
rail mounting
1)
Extension with 4 DI, 2 AI, 2 DO and 1 AO,
IP20, snap-on rail mounting. Firmware
version V1.3R1 required.
SK TU5-CTR
Data
5-digit, 7-segment
display, keyboard
IOs
4 IO (usable as DIN
or DOUT)
1 Safe DI
Data
3 Options
SK CU5-...
Part No. Info
275297000 Installation in
the SK TU5
slot
Part No. Info
275298200 Functional
safety:
2-channel
connection
275298000
BU 0630
Part No. Info
19140990 TI 19140990
275900210 TI 275900210
59