Table of Contents
Advertisement
5.2.4
Date Entry (A13)
If your indicator was ordered with the Time and Date option, it will keep track of the
current date for you, which can then be printed on the print ticket. Use this procedure to
set the current date, which must be set in mm/dd/yy format. For example, for January 7,
1998, you would enter 010798. For November 30, 1998 you would enter 113098.
1.
While in the User Menu mode, scroll to "A 13", then scroll down once using the
ZERO key to enter the date entry menu.
2.
The display will momentarily show "ENT DT", followed by a value with one flashing
digit. This value will be the current date in mm/dd/yy format.
3.
Use the four directional keys (shown in Figure 5-1 above) to adjust the displayed
value to the actual date value. Increase the flashing digit by pressing the UNITS
key. Decrease the flashing digit by pressing the ZERO key. Pressing the PRINT key
or the TARE key will change the position of the flashing digit.
4.
After setting the exact value, press the NET/GROSS key to save the date value.
The display will show "End DT" momentarily, then revert back up to A13.
Page C-1
Advertisement
Table of Contents
