Table of Contents
Advertisement
5.2.2
LF (Line Feeds) Number Entry (A6)
1.
While in the User Menu mode, scroll to "A 6", then scroll down once using the
ZERO key to enter the Line Feeds menu.
2.
The display will momentarily show "LF", followed by the current line feeds value.
3.
Use the four directional keys (shown in Figure 5-1 above) to adjust the displayed
value to the actual line feeds value. Increase the flashing digit by pressing the
UNITS key. Decrease the flashing digit by pressing the ZERO key. Pressing the
PRINT key or the TARE key will change the position of the flashing digit.
4.
After setting the exact value, press the NET/GROSS key to save the line feeds
value. The display will show "SET" momentarily, then revert back up to A6.
5.2.3
Time Entry (A10)
If your indicator was ordered with the Time and Date option, it will keep track of the
current time for you, which can then be printed on the print ticket. Use this procedure to
set the current time, which must be set in military (24-hr) format. For example, for 9:00
AM, you would enter 900. For 5:00 PM, you would enter 1700.
1.
While in the User Menu mode, scroll to "A 10", then scroll down once using the
ZERO key to enter the time entry menu.
2.
The display will momentarily show "ENT TI", followed by a value with one flashing
digit. This value will be the current time in military (24-hr) format.
3.
Use the four directional keys (shown in Figure 5-1 above) to adjust the displayed
value to the actual time value. Increase the flashing digit by pressing the UNITS key.
Decrease the flashing digit by pressing the ZERO key. Pressing the PRINT key or
the TARE key will change the position of the flashing digit.
4.
After setting the exact value, press the NET/GROSS key to save the time value. The
display will show "End TI" momentarily, then revert back up to A10.
Page C-1
Advertisement
Table of Contents
