Connect Telephone Cables - Canon FAX-L120 Starter Manual

Connect Telephone Cables and Install Handset

Connect Telephone Cables

Connect the supplied telephone cable to the line jack (A) and the wall jack.
Connect any external device to the external device jack (B) if required.
If you have the optional handset, connect the cable to the handset jack (C).
3
Insert the plugs (with the cradle) into the holes
on the machine.
7
C
B
A
4
Carefully push the pins into the plugs as far as
they will go.
Install Handset (Optional)
1
Use a screwdriver to remove the covers on the
left side of the machine.
5
Place the handset on the cradle.
2
A
Insert the plugs with pins (A) into the holes on
the handset cradle.
NOTE
Do not insert the pins all the way into the plugs at this
point.
6
A
Hook the handset cable on the retainer (A) at the
back of the machine to retain the slack.
NOTE
If using the handset or an external telephone, make
sure to set the fax receive mode to <FAX/TEL> or
<MANUAL>. For how to set the receive mode, see
"Set the Receive Mode," on p. 16.
8