Table of Contents
Advertisement
PROGRAMMING CONTINUED
Activation Delay Modes. Programmed by pressing Programming Switch while
the unit is Ready (steady green light). Audible sound provides feedback. This
programming must be entered within 2 seconds.
Press 2 times
Press 3 times
Press 4 times
Once the unit is activated, it goes through a repetitive cycle with the times
shown above. To turn it off, simply press the ON-READY-OFF Switch.
Charge the T.E.D.D. by attaching the DC charger provided to the access port
on the metallic base.
DURABILITY
Steel base, High Temperature Polycarbonate side, nylon top cover. Can
survive a drop of 2 stories (17 ft and 3.7 m) onto concrete.
Submersible to 10 ft (3.3 m)
BATTERY
Device autonomy: 60 minutes continuous light & sound
Battery Li-Ion Rechargeable pack (built in)
Charge time 1.5 hours
Battery life: 500 full recharges to 70% of battery life
100-240VAC 50/60 Hz, 12.6VDC, 0.6A.
The battery manufacturer recommends fully charging the unit at least
every 3 months to best maintain battery condition
DIMENSIONS & WEIGHT
2.5 in (63 mm) diameter, 3.4 in (82 mm) height
Weight: 1.1 lbs (490 g)
4
Press 1 time
2 seconds
4 seconds
7 seconds
10 seconds
Advertisement
Table of Contents
