Pre-Use Inspection And Maintenance - Mackworth 540100 User Manual

9. Pre-Use Inspection and
Maintenance
Prior to each lift, this will be completed by the user, the Easy Fit system and associated hoist,
accessories and sling(s), must be visually inspected . Refer to the hoist, accessory and sling user
guides for specific details regarding their inspection .
Should any of these items below fail the inspection do not use the Easy Fit system - Contact your local
authorized dealer for service
Visually check for the following:
• The Easy Fit system parts should not be loose, broken or bent
• The bases are on a stable, level surface and the side support assemblies are secure and in the green safe
zone (see (fig 5a .) below)
• Ensure that both side support assemblies are completely vertical from all directions (see (fig 5b .) below)
• The trolley moves easily along the track
• The top plate and bottom plate must be cleaned with wet cloth before installation in order to remove dirt
on rubber moulds . See "cleaning the rubber base" section on page 26
• The adjustment track is placed in the correct location for transferring
• The portable hoist has been inspected as outlined in its owner's manual
• The sling (s) has been inspected as outlined in its owner's manual .
fig 5a
1 . See (fig 5a .) - Ensure Pressure guide is in the Safe Zone . Note: Green section must be
visible on both sides of the guide.
2 . See (fig 5b .) - Ensure both sides are vertical from the front and the side
90°
fig 5b
18