Troubleshooting - Mackworth 540100 User Manual

8. T roubleshooting
Should problems arise with the use of the Easy Fit System review the following chart . Find the fault and
complete the recommended solution . If the fault is not found and/or the solution does not correct the
problem, contact your local authorized dealer for service immediately .
Fault
Visually the system is not aligned
straight
Feet are slipping after installation
Lever is not engaged with mag-
net.
Pressure gauge is not in safe
zone.
The adjustable track does not ex-
tend smoothly or doesn't extend
up to required limit.
Reason
1. Level is not working.
2. Floor is not levelled.
3. Level is damaged.
4. Post is knocked with impact
1. Feet are not cleaned.
2. Floor is not cleaned.
1. Post Assembly instructions
not followed
2. Clutch bearing function fails.
3. Lever not cleaned.
1. Post assembly instructions not
followed.
2. Barrel nut is loose or not
secured tightly.
3. Top plate Spring broken or
bent.
1. Physical damage to track.
2. Track slots are not cleaned.
Recommended Solution
1. Set up the post following "Post Assembly
Instructions". Check visually and with master
level to ensure the post is aligned straight.
2. Check the floor with master level for
flatness.
3. Visually check the level is fine.
4. Dismantle the post following "Post
Disassembly Instructions" and set up again
following "Post assembly instructions". If
problem persists, contact your local Authorized
dealer immediately
1. Clean the feet as per "Cleaning the Rubber
Base" Instructions.
2. Ensure floor area is dry and free of obstacles.
If problem persists, contact your local
authorized dealer immediately .
1. Press in the ratchet and hold it. Grab the
lever and push up to the magnet label.
2. Contact local authorized dealer immediately.
3. Ensure lever is cleaned and free of grease or
dirt.
If problem persists, contact your local
authorized dealer immediately
1. Set up the post following post
assembly instructions.
2. Tight the barrel nut with flat screw driver.
If problem persists, contact your local
authorized dealer immediately
1. Check for physical damage to track. If so,
contact local authorized dealer immediately
2. Clean the track slots with cloth and wipe out
the dirt. Again try extending the tracks.
If problem persists, contact your local authorized
dealer immediately .
16