Table of Contents
Advertisement
4
Click the Properties tab, and click to select the Enable digital CD
audio for this CD-ROM device check box.
Why did the computer screen (LCD) go blank?
❑
Your computer screen may go blank if the computer has lost power or is in a
power saving mode (Standby or Hibernate).
❑
Make sure the computer is plugged into a power source and is on. The
power indicator on the computer will be on if the computer is on.
❑
Make sure the battery is inserted properly and is charged.
❑
If the computer is in LCD (Video) Standby mode, press any key to
activate the computer screen.
❑
If the display mode is set to external display, press and hold the Fn key while
you press F7 several times.
Why don't my changes appear on the computer screen (LCD)?
You may need to refresh the computer screen. Press the Windows key
press D twice.
How do I adjust the image on the TV screen?
Use the controls on your external display to adjust the image. See the guide that
came with your display for more information.
How do I change the video resolution on the TV screen?
The video may not appear on the entire TV screen if your computer resolution is
set larger than 1024 x 768. Adjust the video resolution to 1024 x 768 or smaller.
To change the video resolution, follow these instructions:
✍
If you are using the A/V Out jack, plug the audio-video
before you start the computer.
1
Right-click the desktop, and select Properties from the shortcut menu. The
Display Properties dialog box appears.
2
Select the Settings tab.
3
Move the screen resolution slider to the left to reduce the size and to the right
to increase the size of the video resolution.
Troubleshooting DVDs and CDs
(AV)
cable into the computer
and
185
Advertisement
Table of Contents
Troubleshooting
