Sony PCG-NV290 VAIO User Manual page 182

VAIO Computer Quick Start
What are channels?
Wireless LAN communication occurs on divided frequency bands known as
channels. Third-party wireless LAN access point channels may be preset to
different channels from Sony devices.
If you are using a wireless LAN access point, refer to connectivity information
contained in your access point instructions.
Why can't I establish a connection between two VAIO computers?
❑
Your computer may not recognize an i.LINK
is not plugged securely into the i.LINK ports. Disconnect the i.LINK cable
and securely reconnect it to both computers. If neither computer responds
after a few moments, restart both computers.
❑
If the computers do not recognize the i.LINK connection after resuming
from a power saving mode (Standby or Hibernate), restart both computers.
For more information, see "Connecting Another VAIO Computer."
* i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394
connection. The i.LINK connection may vary, depending on the software programs,
operating system, and compatible i.LINK devices. All products with an i.LINK connection
may not communicate with each other. Refer to the documentation that came with your
compatible i.LINK device for information on operating conditions and proper connection.
Before connecting compatible i.LINK PC peripherals to your system, such as CD-RW or
hard disk drive, confirm their operating system compatibility and required operating
conditions.
182
*
connection if the i.LINK cable