PCG-NV290 SERVICE MANUAL For American Area Canadian Model Ver 1-2002J Revision History S400 Lineup : PCG-NV290 • Design and specifications are subject to change without notice. NOTEBOOK COMPUTER 9-876-001-01...
Page 2
Information in this document is subject to change without notice. Sony, VAIO and CLIE are trademarks or registered trademarks of Sony. Microsoft, Windows, Windows Media, Outlook, Bookshelf and other Microsoft products are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries.
Section Title CHAPTER 1. BLOCK DIAGRAM CHAPTER 2. FRAME HARNESS DIAGRAM CHAPTER 3. EXPLODED VIEWS AND PARTS LIST ... 3-1 3-1. Main Section ... 3-3 3-2. LCD Section (NV290 Model) – Made by SH – (Only CTO) – Made by TS – ... 3-7 3-3.
EXPLODED VIEWS AND PARTS LIST NOTE: • Items marked “ * ” are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • The mechanical parts with no reference number in the exploded views are not supplied.
3-1. Main Section Ref.No. Part No. Description Ref.No. Part No. X-4624-632-3 ASSY MEMORY COVER 4-662-679-01 INSULATOR MEMORY COVER X-4624-633-2 ASSY MINI PCI COVER 4-661-307-01 FOOT FRONT 4-662-680-01 INSULATOR MINI PCI 4-661-671-02 INSULATOR BOTTOM 4-661-164-11 MODEM COVER 4-661-113-02 HDD DOOR * 61 4-664-566-01 CUSHION HDD BRACKET F * 10...
Page 8
(CTO Model) Supplied with 48 (NV290/CTO W-LAN Model)( 1) 1 These components are related to the WIRELESS LAN. Supplied with 3 (NV290/CTO W-LAN Model) ( 1) Supplied with 30 Supplied with 23 (NV290/CTO W-LAN Model)( 1) Supplied with 85 (CTO Model) (NV290 Model) Confidential PCG-NV290 (AM)
3-2. LCD Section (NV290 Model) – Made by SH – (Only CTO) – Made by TS – (NV290/CTO W-LAN Model) ( 1) Ref.No. Part No. * 309 * 315 Supplied with 310 1 These components are related to the WIRELESS LAN. Installation positions of the antenna and connectors are specified depending on the colors of the lead wires.
3-3. Connector Section (CH Type only) Ref.No. Fig. Among the parts that are used on the boards of this model, only the connectors that are show in the list can be replaced. (The parts other that the specified connectors cannot be replaced.) Part No.
4-1. Replacing the CPU 1. Removing the CPU 1 Insert a flat-blade screwdriver into the notch as shown in the illustration and rotate it so that the protrusion comes to the lock release position. 2 Pull the CPU gently upward to lift it out of the CPU socket. Lock release position 2.