Sony PCG-NV170P VAIO User Guide (primary manual) User Manual page 71

To connect an AV device
1.
Locate the AV Out jack on the left panel of the computer.
2. Plug one end of an audio-video cable (not supplied) into this jack, and plug the opposite end of the cable into
the audio-video device.
3.
Make sure you switch the TV input channel to external input and set up the TV configuration system. See
change the display
Connecting a TV to the Com puter
See the manual that came with your peripheral device for more information on its installation and use.
for more information.
To
Page 71