Sony PCG-NV170P VAIO User Guide (primary manual) User Manual page 38

To remove a device while the computer is on
Before disconnecting the device, close any active applications to help prevent data loss.
1.
Double-click the Safely Remove Hardware
appears.
2.
In the Hardware devices box, click the device you want to remove, and click Stop. The Stop a Hardware device
window appears.
3.
Verify that the correct device is selected, and click OK. A message appears stating it is now safe to remove the
device from the computer.
4.
Slide and hold the multipurpose bay Release switch in the release position while you gently pull the device from
the bay.
If you do not plan to install another device into the multipurpose bay, insert the supplied weigh saver to protect the
bay.
icon on the taskbar. The Safely Remove Hardware window
Page 38