Table of Contents
Advertisement
To connect a USB device
1.
Locate a USB
port on the rear panel of your computer.
2.
Plug one end of the USB cable (not supplied) into one of these ports, and plug the opposite end of the cable into
the USB device, if it is not already connected.
You can use a Sony USB mouse (not supplied) with this computer. The USB mouse software driver is preinstalled,
however, the first time you connect a mouse, on-screen installation instructions may appear. Press Enter to complete the
on-screen instructions.
Connecting a USB Dev ice to a USB Port
See the manual that came with your USB device for more information on its installation and use.
Page 63
Advertisement
Table of Contents
Troubleshooting
