Table of Contents
Advertisement
To connect a USB printer
1.
Locate a USB
port on the rear panel of the computer.
2.
Plug one end of the USB printer cable (not supplied) into one of these ports, and plug the opposite end of the
cable into the USB port on your printer.
3.
Make sure your computer's printer settings are properly set. See
more information.
To use a printer, you may need to install the driver software that came with your printer.
Connecting a USB Printer
See the manual that came with your printer for more information on its installation and use.
Displaying the Sony Notebook Setup Screen
for
Page 65
Advertisement
Table of Contents
Troubleshooting
