Page 1
Desk Riser with Dual Monitor Mount Instruction Manual SKUS: DESK-V000K-M2/G/W DESK-V000KN-M2 Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v000k-m2 GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
CAUTION! WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
Page 3
STEP 3 STEP 7 Raise Desk (A) by lifting the handle on the right side of the frame. Remove adhesive backing from Rubber Pads (P) and place them on the underside of over Grommet Plate (M). Remove plug from Desk (A). STEP 4 STEP 8 Place Keyboard Tray (B) on the metal brackets on Desk (A).
Page 4
STEP 13 STEP 10 Flat Back Monitor Route cables through Arm Cable Clips (K) and Pole Cable Clip (J). Install VESA Plates (I) to monitors using Screws (M-A or M-C) and M5 Washers (M-E). STEP 14 Curved / Recessed Back Monitor Install VESA Plate (I) to monitors using Screws (M-B or M-D), M5 Washers (M-E) and Spacers (M-F).
Page 5
: 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the DESK-V000K-M2/G/W and is the answer not in the manual?
Questions and answers