Page 1
Dark Walnut / Black Desk Riser Instruction Manual SKU: DESK-V000SD Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v000s GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
ASSEMBLY STEPS STEP 1 Apply Pads (D) to the underside of Keyboard Tray (B). Install Stopper (C) on Keyboard Tray (B) using ST4.2x12mm Screws (S-A) in the pre-drilled holes and a Phillips screwdriver. STEP 2 Turn Adjustable Desk (A) over on side and apply Rubber Feed (E) to slots on underside of Desk. Cut the shipping strap and turn Adjustable Desk (A) over, being careful not to lift from the handles.
Page 4
STEP 3 Press handle on Adjustable Desk (A) to raise it to it’s highest position, revealing the keyboard brackets. Slide Keyboard Tray (B) onto brackets on Adjustable Desk (A) and secure using M5x10mm Screws (S-B) and a Phillips screwdriver.
Page 5
STEP 4 Use Cable Clips (F) as needed to organize and route monitor or accessory cables.
Page 6
CAUTION! Keep monitor and Follow the cable Leave enough slack Raise desktop laptop base fully on routing instructions to in cable to allow for slowly to keep the desktop. avoid the potential to full range of vertical items stable. pinch cables. motion (15”...
Page 8
: 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the DESK-V000SD and is the answer not in the manual?
Questions and answers