Prepare The Hood - Broan BCSQ1 Series Installation Use And Care Manual

Prepare the Hood

1 ] If present, remove all protective polyfilm from the hood and/or parts.
2 ] Using the tab, remove the grease filters from the hood by pushing down and tilting filters out.
3 ] Remove both screws holding damper assembly to hood. Remove parts bag (captured behind
the damper assembly). Remove damper assembly from inside the hood and keep the screws
for further use.
4 ] Remove the wiring cover (shaded part on illustration below) by sliding it out from the hood
and set it aside.
SCR EWS
DAMPER
ASSEMBLY
9