Table of Contents
Advertisement
Connect the Wiring
1 ] Connect House Power Cable to range hood wiring: BLACK to BLACK, WHITE to WHITE and
2 ] Reinstall wiring cover and attach it to the hood using its retaining screw.
Install the Filters
Ducted Installation Only:
Re-install grease filters removed in step 2 , page 9, under "Prepare the Hood" .
Non-ducted Installation Only:
Purchase two non-ducted filters from your local distributor or retailer (see product specification
14
label for filter type). Attach the non-ducted filter(s) following instructions packed with the
non-ducted filter.
Risk of electric shock. Electrical wiring must be done by qualified
personnel in accordance with all applicable codes and standards.
Before connecting wires, switch power off at service panel and lock
service disconnecting means to prevent power from being switched
on accidentally.
GREEN or bare wire under GREEN ground screw.
Ensure both tabs on inner top of hood are engaged in their corresponding slots in
wiring cover. Also, take care not to pinch wires while reinstalling wiring cover.
WARNING
!
HOUSE
POWER CABLE
CAUTION
!
MOTOR
GROUND
WIRE
GROUND
SCREW
TABS ON INNER
TOP OF HOOD
ENGAGED IN
SCREW
WIRING COVER
SLOTS.
Advertisement
Table of Contents
